#1
5th Oct 2005 at 11:09 PM
Last edited by Jax2 : 9th Oct 2006 at
4:46 PM.
Reason: UPDATES!!!! READ! (10/9/06)
Working Elevator tutorial... very cool!
UPDATE (10/9/06) So you all know, this tutorial was made long before OFB was out and before maxis stole the idea for elevators from this site and others.
The site where you could download the fake elevator is gone, for a while now, so please don't ask any more questions about this.
Thanks to everyone who has tried to keep this up to date in my absence. I have since returned to MTS2 and plan on being around for a while. Use this post only as a reference to how things used to be
Hello everyone, I will try and show you 5 quick steps to making a kick butt
working elevator for your sims houses and businesses. Now pay attention!
Step 1)
If you don't already have a pre-built house, this will be a bit easier as you can build around the "elevator shaft".
You will need the following files installed before you begin:
The actual elevator function by Shaklin (german, don't worry, just download:
http://shaklin.sh.funpic.org/module...php?cid=2&lid=5
For a touch of realism, be sure to get moon ez's wonderful elevator doors, walls, and floors at:
http://forums.modthesims2.com/showthread.php?t=65694
Now, once you have all these installed into your downloads directory (c:\my document\ea games\the sims 2\downloads), go on to step 2.
Step 2)
For this tutorial, we will make an empty 3 story 8 x 8 building, with a 2 x 2
section attached somewhere on the outside wall (I used the back wall):
Make sure to add floors to all levels, both in the building and in the "Shaft",
don't forget to add a door from the outside into the building either, heh. For each floor, click on the sliding glass doors and wait a moment for the optional screen to pop up. Choose the sliding glass door that best suits your elevator (I used the plain steel door (no windows) on mine)
So, each of your floors should look close to this:
Step 3)
Now comes the tricky part. Starting with floor 1. Click on stairs in your build
tool, and select the elevator "stairs". Place this in your shaft exactly how
you see it in the picture below:
If you do not place it exactly like this, your upper floors will not work
correctly. This goes for every floor I will show you, follow the pictures exactly.
Step 4)
Move up to the 2nd level, and place the "Elevator steps" exactly as shown here:
Now, you may notice that the elevator buttons are sitting in the middle of the shaft, and are not against the wall. This cannot be helped, and you will very seldom notice this during game play.
Step 5)
Well, there really is no step 5, I lied. If you want to go higher than 3 floors, simply put another "elevator step" on the 3rd floor, in the exact same position you put it in on the first floor. In other words, every other floor
they're in the same spot. This is unlimited, you can make your elevator as high as you want.
Now, test it out by having your sim move in (if he / she hasn't already) and
click somewhere on the 3rd floor and choose go here. You should see your sim enter the elevator (Notice how the doors open just like a real one?) and
then pop up on the 3rd floor, where the doors will again open nicely and let him/her out.
If for some reason this doesn't work, and your sim does not want to move up
to the 3rd floor, go back and check the positioning of your "elevator stairs"
and be sure they are placed exactly as in the pictures above.
Between the elevator doors/walls/floors by moon ez, and the elevator stairs by Shaklin, this is a perfect working, and looking, elevator. Enjoy!
-=Jax2=-